As the last procedure of pyrometallurgy, the refine casting process of the anode furnace is assumed the task to conduct further oxidate, restore the product element(the raw copper : Cu98.5% content and the temperature 1130℃) from the converter to remove the impurities. Output the anode copper with Cu>99.3% content and temperature 1200℃. After the refine operation is completed, the anode plate temperature will be reduced to the room temperature from 1100℃ by forced water cooling. Then the anode plate is sent to wet electrolytic refining. Therefore, the energy shall be supplemented firstly during fire refining process. It need burner certainly. The fuel of Anode Furnace Burner can be fuel oil, coal gas, natural gas. It can be nomoral or oxygen-enriched combustion(saving more than 30% than normal combustion).