> Pulverized Coal with Boiler and Combution Technology
> Hot-blast Air and Drying System
> Burner and Idustrial Burner Nozzle
> Nonferrous Metals Smelting Equipment
> Torch and Flue Gas Incineration Equipment
> Metallurgical Combustion Equipment
> Combustion Control System
> Solid Powder Adhesive Reduction Reuse Project
 

 

 
Telephone+86-0315-6530512
   +86-0315-6530516
   +86-0315-6530509
   +86-0315-6530519
Telephone 13503156970  
    13932588053  

 
 
-------------------------------- The present positionHome Page/Product/Burner and Industrial Burner Nozzle/Blast furnace gas burner---
 
    Product -Burner and Industrial Burner Nozzle-Blast furnace gas burner
 
 
Yanquan Brewery 2*JST300G blast furnace burner application show, applied with 10t fuel gas steam boiler
2*JST450G type burner application show, split type remote control, double-burner layout, applied with 15t SZS type boiler
 
 
 Blast furnace gas burner
 
     The blast furnace gas burner is mainly designed for burning the blast furnace gas generated from the iron and steel producion process. It is applicable for the blast furnace gas with any pressure and any calorific value. The burner adopts the multiple-head internal mixed technology, so the combustion is complete and stable and it can realize automatic ignition, fire-off protection, automatic fire adjustment and other functions. It is not required for heat accumulation when ignition and it has been widely applied in the iron and steel enterprise and the related enterprises.

Feature

       1The calorific value of the fuel is low, about 700-900Kcal/Nm3, it is not easy to ignite.

       2If there is no special requirements of the fuel gas pressure or components, the common designed pressure of the fuel gas shall be 5-8kpa. If the user send the required value to us, we will follow and preset the value into the system.
       3It is usually applied in the negative pressure combustion furnace.
       4The sectioned fire type, air door adjustment proportion type, frequency conversion regulation proportion type, touch screen digital control, frequency conversion regulation of the industrial personal computer and other control systems can be configured according to user's requirements.

       5The fuel gas and the air door shall be controlled by the separate channel, the air / gas proportion K value shall be set online to accurately control the air / gas proportion and prevent error caused by connecting rod transmission.

       6The system shall be equiped with flame detection, fire-off protection, automatic ignition, over-temperature/overpressure protection, leakage detection in valve groups and parameter display etc.

       7The control system shall be based on the standard communication protocol and can be connected with the upper system of the user for communication.
       8If without self-control system,? manual control can be Ok to ensure normal combustion. It is very easyto adjust.
 
Introduction of the model
 
Technical performance Figure
 
 
 

Company address: Qianan Industrial Park, Tangshan, Hebei, China.   
Telephone+86-0315-6530512/6530516/6530509/6530519  Email 7048444@163.com
All rights reserved  Tangshan Jinsha Combustion Heating Energy Co.Ltd.   hebei ICP file NO.14009549-1