> Pulverized Coal with Boiler and Combution Technology
> Hot-blast Air and Drying System
> Burner and Idustrial Burner Nozzle
> Nonferrous Metals Smelting Equipment
> Torch and Flue Gas Incineration Equipment
> Metallurgical Combustion Equipment
> Combustion Control System
> Solid Powder Adhesive Reduction Reuse Project
 

 

 
Telephone+86-0315-6530512
   +86-0315-6530516
   +86-0315-6530509
   +86-0315-6530519
Telephone 13503156970  
    13932588053  

 
 
-------------------------------- The present positionHome Page/Product/Burner and Industrial Burner Nozzle/Coke Oven Gas Burner---
 
    Product-Burner and Industrial Burner Nozzle-Coke Oven Gas Burner
 
 
2*JST1200J type burner application show in Dingzhou Xuyang coke oven plant, applied with 40t fuel gas steam boiler
 
 
 Coke Oven Gas Burner
 
       The coke oven gas is the by-product of the coking industryand is also called as the city gas. It has been widely applied in coking, steel, chemical industry and other industries related to coking. The hydrogen content of the coke oven gas is extremely high and the combustion speed is fast, which it is great explosion hazard and combustion instability compared with other fuels. For the coke oven gas burner developed by our company, the fuel performance is fully considered in the design. We make special treatment in ignition, air blasting, adjustment, prevent fire turn-back and other aspects. On the basis of high-efficient combustion, PLC, touch screen, industrial computer and other advanced control technologies areapplied to guarantee operation safety and reliability.?

Feature

       1The ignition source is the coke oven gas. It is convenient operation.

       2According to the feature of the coke oven gas and the influence of the tar on combustion shall be fully considered, the heating filter shall be optional.
       3Different treatment shall be conducted against different user sites and the combustibility and explosiveness of the fuel.
       4If there is no special requirements of the fuel gas pressure or components, the common designed pressure of the fuel gas shall be 5-8kpa. If the user send the required value to us, we will follow and preset the value into the system.
       5The flame dimensions can be specially designed according to the furnace chamber dimensions and the user's requirements.
       6The different forms of automatic control can be configured: type (air door sectioned control and frequency conversion sectioned control), air door adjusting proportion type and frequency conversion adjusting proportion type, touch screen digital control, industrial computer frequency conversion proportion control and so on. It can meet different user's requirements.
       7The fuel gas and the air door shall be controlled by the separate channel, the air / gas proportion K value shall be set online to accurately control the air / gas proportion and prevent error caused by connecting rod transmission.
       8The system shall be equiped with flame detection, over-temperature, overpressure, leakage detection in valve groups and other safety interlock protection.
 
Introduction of the model
 
 
Technical performance Figure
 
 
 

Company address: Qianan Industrial Park, Tangshan, Hebei, China.   
Telephone+86-0315-6530512/6530516/6530509/6530519  Email 7048444@163.com
All rights reserved  Tangshan Jinsha Combustion Heating Energy Co.Ltd.   hebei ICP file NO.14009549-1